More good news. This month, Rocketfish started selling two new wireless headphone models in Best Buy stores nationwide. There are two models, the RF-WHP01 and RF-WHP02. Each model has Avnera’s first generation wireless audio system, which at this point is popping up in many other places.

Both models are targeted at TV and home AV environments.

Key application usages:

1. Watching TV at night without disturbing house-mates (Killer frickin’ app)
2. Enhancing TV/AV audio for people with diminished hearing
3. Listening to music from iPod dock, PC, home stereo while cooking dinner, doing housework, etc.

The RF-WHP01 and RF-WHPo2 are both very similar models, with the primary difference being:

1. RF-WHP02 is mainly targeted at TV users, so it offers some hook-up flexibility. Including a boom mic option for older sets that don’t have supplementary audio outputs. This is also a quick and dirty way for someone to enjoy music at a higher volume level than others also watching the same TV, without headphones.
2. RF-WHP02 has a spatial enhancement feature to enhance stereo sound.
3. RF-WHP02 also offers some voice enhancement meant for people with diminished hearing who have difficulty picking out speech when watching TV.
4. RF-WHP01 has black trim. The RF-WHP02 has metallic maroon trim.

The RF-WHP01 & RFWHP02 are available now at Best Buy stores. As of the writing of this article, they are not yet available online, though that’s only a matter of time.

UPDATE: They are available now online: RF-WHP01 for $79.99 and RF-WHP02 for $99.99.

To get a sense of what a killer deal this is… compare this to Sony’s 2.4GHz and the 60-some dB SNR 900 MHz junk that is still hanging around…

So forget IR, forget 900 MHz, forget paying north of $200… pick up a pair of Rocketfish headphones that just work.

Comment thread here pretty decent as well… fair and balanced folks. Although again, many of the negative experiences mentioned in the thread could have been addressed if they visit this comment thread. I’m also loving the shout-0uts for AudioEngine’s AW1. Which rocks in its own way.

CrunchGear review of Rocketfish’s RF-WHTIB.  Still you can’t beat the comment thread here at wirelessaudioblog - it trumps all for answers to your questions. Thanks!

In a follow up to his article published last month, Michael Kanellos on CNET News.com posted a video that shows you both the AWD210 from Acoustic Research and the Rocketfish RF-WHTIB. Not a bad endoresement (and demonstration) of our technology.

Follow the link: Video: Wireless speakers: Sound at last?: Avnera unveils low-cost, high-yield chip.

Like many others I am sure, Kevin snagged one of the RF-WHTIBs that were on sale last weekend.  He’s declared that it has solved his problem.  Great!

Interesting blog, too.

This Thanksgiving holiday season, I’ve seen more Black Friday chatter on the web than I can remember ever seeing in the past. From Gizmodo, Engadget, Google ads to ad hoc urls like http://www.blackfriday.info, it’s endless.

Obviously some deals are better than others. The one that caught my eye of course is the one offered by Best Buy for the Rocketfish RF-WHTIB wireless rear speaker kit. At $79.99, this is 20% off from it’s normal retail price. At $99, the commentors talk about what a great value this product is… so at $79, this is a steal.

At Brian’s Brain, Dipert was one of the first bloggers to write about the Rocketfish RF-WHTIB. He had some issues with an early production example, but has since come back to it after realizing the grass ain’t so green on the 5.8 GHz side of the fence. So far so good.

The experience he had with the 5.8 solution will become more and more common. People get frustrated with sub-standard 2.4 GHz getting interfered with by other 2.4 GHz systems. So they figure, “I’ll just change RF frequencies and all my problems will be solved.” Well let me offer a few points to consider before you, too, make this leap of faith:

1. The 2.4 GHz spectrum is popular because it is a technological sweet-spot. 2.4 GHz has the least amount of regulatory conflicts world-wide, and thus it sees incorporation in products/technology platforms that are destined for global/higher volumes, and thus can lead to better economies of scale - making 2.4 GHz a more economic option for end-users on the average. 5.8 GHz is the newest ISM band, and across regions there are inconsistencies that drive lots of FUD thru the industry. OEMs don’t like this, and thus adoption is and solutions are less common, and suffer from negative economies of scale. Also 2.4 GHz is typically lower power at the circuit level, and so you can get smaller form factors and longer battery lives… also generally good things in 2.4’s favor.
2. The notion of RF co-existence is a concept worth introducing and discussing. Basically when you consider a system, like WLAN, or more specifically 802.11g, you need to think about two things. One, how it causes performance degradation to other co-located systems, and how it’s own performance is degraded by other co-located systems. Like any healthy relationship, one must understand that each must be considerate… i.e. attention must be paid both ways. The initial impression that Brian had, and many others harbor, against 2.4 GHz is that anything in 2.4 GHz will degrade his precious 802.11g network. Think FHSS 2.4 GHz cordless telephones. Think Microwave ovens. Think like Mr Hasty, a quick to act wireless audio system designer… what’s important to Mr. Hasty? That his audio sound good in the presence of other 2.4 Ghz radios. If you stop there, and design, you end up with wireless audio systems that stomp(!) on WLAN and others, like Bluetooth, and FHSS telephones, and many others. This happens because Mr. Hasty likes to throw power to the transmitter and send lots of extra overhead into the spectrum to ensure his audio gets there. And sometimes it does. But like Sherman marching thru Georgia, the ends maybe don’t justify the means. Bottom-line… not all 2.4 GHz system focus on co-existance. They place a priority on survival. AvneraAudio knows the economics of 2.4 GHz, and thus wanted to build a wireless audio system that was not only designed to survive, but also to be a good neighbor. If you let Avnera’s system into your world, it will avoid WLAN, and BT will avoid us. Microwaves are easy to spot, and so we move away from that too. And Cordless phones are loud but forgiving, like a shouting person in a crowded place… So we just filter it out, and focus on our more polite conversation until the egotist pipes down and goes away. Even more Bottom-line: Smart design is needed for co-existence. So Mr Hasty should have paused and asked, how do we survive, but not at the expense of others…. would-have-been-result: consumers’ rejoice.
3. Just cause you buy something with a 5.8 GHz radio doesn’t mean you avoid co-existence issues. It only means you avoid interference from 2.4 GHz systems!!! Well, I got news for ya, it ain’t like 5.8 GHz is all cookies and cream. You got messy cordless telephones, you got 802.11a, you got a lot a stuff… Again, if you go 5.8 GHz, why go there with a communications system technology that was unproven in the 2.4 GHz domain. You are only transferring your conflicts to a different arena. Traditional wireless audio vendors think a solution to poor 2.4 GHz performance is to offer a 5.8 GHz option. Bizz!

The solution is better communication system design, through co-existence. Never have the words of Rodney King (pictured above) been such an inspiration “People, I just want to say, you know, can we all get along?”

Wait a minute: did I just mock a hero Union Army general (which Pavement cemented into my psyche with “Unseen Power of the Picket Fence”, 15 years ago), and take inspiration from a convicted wife-beater? Forget Brian’s brain… what about mine? To think I was talking about good wireless audio system design. Oh, how the lure of the mass market corrupts… militarists and penologists, avert your eyes.

HONG KONG — So for those who can put 2 and 2 and 4 together, it may not come as a suprise that I work for a company called Avnera. I’ve not mentioned it before since we’ve been in “stealth” mode, which has its advantages, no doubt. But it’s also a good thing when the story does get out, and that has begun as we issue our first press release and make some early product announcements with some of our early customers… customers whose products have been much discussed here at Alive Matters. Namely the RF-WHTIB from Rocketfish and the AWD210 from Acoustic Research.

Here’s a list of public information and press coverage of our company and products:

• Official company press release
• “Wireless audio from startup eliminates media room snakes” by Mike Rogoway, The Oregonian
• “Wireless audio wit..out th.. dr..o..p out” by Chris Nuttal, Financial Times
• “Beyond Bluetooth: Manpreet Khaira’s new company cuts the cables” by Aliza Earnshaw, Portland Business Journal
• “Startup tries proprietary path to wireless HiFi” by R. Colin Johnson, EETimes
• “Wireless Speakers: Sound at last?” by Michael Kanellos, CNET News.com
• Photo full-monty on CNET
• Coverage of coverage: “Stirring the wireless stew” on Interconnects
• Coverage of coverage: “Avnera comes out of stealth mode” on OregonStartups
• Coverage of coverage: “Avnera’s backers include new Oregon VC fund” on The Silicon Forest Blog

Additional coverage will be seeping out over the coming days, and most folks around Avnera are happy to be able to tell their families what the late hours have been about for the past 3.5 years.

It’s kinda funny to read how our meticulously crafted and technically-precise pitch has been interpreted and relayed to the masses. The craft of stroytelling and reporting is one I’ve grown up understanding from my father, who was a journalist by training and throughout most his life, lived with the spirit of storytelling. But as a technically-minded, detail-oriented person — who from day two has been continuously tasked with helping craft our “story” — to see what happens as the meat passes through a writer/critic’s gray-matter is a minor roller coaster. But overall, I am gratified that the core of our message has penetrated through. Our technology comes from a fundamentally sound, grounds-up systems-based approach to problem solving, and delivers a wireless audio solution that is robust and easy to use, and probably most important, affordable enough to enable true, mass-market applications. Premium performance, at mainstream prices. That’s why we’ve been able to raise $40+ Million, all on a positive-slope valuation curve, and enable a diversified set of early customer applications. There are still kinks in these muscles as we continue to “get warm”, and there will be growing pains, as anyone with startup experience knows, but it’s been an exciting adventure for a gadget guy who definitely shares the meaty grin of one of our founders, Chris O’Connor (pictured in today’s local rag, captured at the right).

Personally, I look forward to being able to share more about our progress and our technology. If detailed answers are what you seek, or if you wish to design with Avnera, contact corporate via the web. If you’re an interested tech-geek or general consumer, chime in on threads here at Alive Matters, if it’s fit to print, and I don’t smell a rat, you’ll get the most accurate take on matters that I am at liberty to discuss. And again, this blog is not officially affiliated with Avnera, and it will always be my intention to blog what I can and should. And it follows, that whatever opinions I express are strictly my own.

The covers have been taken off our first two product lines, but there is much more to come, so stay tuned…

Trolling for Rocketfish write-ups, I came across Bale’s blog.

What I like about this particular article was that he asked users why they needed/wanted a free RF-WHTIB. It’s great to read through the customers’ own descriptions of their pain points… scroll thru the comments in case you are wondering why you may need one.

Gear Diary did a review of the RF-WHTIB.  Best quote:

Once a connection has been established, just start listening to your system and enjoy the full surround sound experience. I was extremely impressed by the quality of the sound coming through these speakers. I did not notice any significant difference or degradation in the sound quality when they were hooked up to the wireless receiver than when they were connected directly to the stereo. I have definitely found my solution to the wireless speaker dilemma.

One of his key negatives is in reference to the “hum issue”.  FYI, the manufacturer has a fix for this issue so current owners can refer to the discussion thread here, and get the fix.  New models also have the fix incorporated.

Rock on.